Barley Crusher Mat Mill - 7lb Hopper

The Barley Crusher is needed for any serious homebrewer who is brewing with more than 8-10lbs of grains. If you are brewing 5-7G batches we recommend the 7lb grain hopper. This is the mill Short Finger Brewing uses and we readily stand behind the quality of this product.

  • Rollers are adjustable at both ends to keep the gap spacing parallel giving a uniform crush along the entire length of the rollers. 
  • The gap default setting is marked and set at .039 at assembly. Adjustment range is from .015 to .070 thousands of an inch. 
  • The rollers have a 12 TPI knurl to efficiently pull the grain through the rollers while leaving the hull intact to form an excellent filter bed for sparging.
  • Comes with a solid base with locators to center the Barley Crusher on a 5 gallon plastic pail. (Pail not included) 
  • Using a 3/8 drillmotor at 500 RPM gives you a crush rate of 6 pounds a minute making the big grain bills fast and easy. 
  • The Barley Crusher is shipped fully assembled. There are no adapters needed to use a 3/8 drill motor.
  • 1018 cold-rolled steel rollers, 6061 aluminum mill body and hopper, tool steel axles with oil-impregnated bronze bushings




Related Items